Epson FX 890 Product Information Guide - Page 15

EPSON FX-890/FX-2190 Clearing Paper Jams Follow these steps to clear a paper jam: 1. Turn off the printer and open the printer cover. 2. If continuous paper is jammed in the printer, tear off the fresh supply at the perforation nearest the paper entry slot. 3. Turn the knob on the left side of the printer away from you to remove the paper in the printer. Remove any remaining pieces of paper. 4. If the paper is stuck where the printer ejects it, gently pull the paper out of the printer. Caution: Use the knob on the left side of the printer to clear paper jams only when the printer is off. Otherwise, you may damage the printer or change the top-of-form or tear-off position. 5. Close the printer cover and turn on the printer. Make sure the Paper Out light is not flashing and the Pause light is off. Changing the Default Settings While you can often change the printer's settings through your software or printer driver, you may sometimes need to change one or more of the printer's default settings. There are two ways to do this: ❏ Using the EPSON Remote Configuration Manager on the printer software CD-ROM. (See the User's Guide for more information.) ❏ From the printer's control panel using the default-setting mode. For instructions on using the Remote Configuration Manager, see the PDF manual on the CD-ROM. To use the control panel, see below. For detailed information about default settings, see the Reference Guide. The following table shows the options available for each printer setting. Setting Skip over perforation Auto tear-off Auto line feed Print direction Software I/F (interface) mode Auto I/F (interface) wait time Parallel I/F bidirectional mode Packet mode 0 slash Buzzer Auto CR (available in IBM PPDS emulation mode) IBM character table* Page length for front tractor Page length for rear tractor Character table International character set for italic table (options depend on country) Manual feed wait time Options (default in bold) Off, On Off, On Off, On Bi-D, Uni-D ESC/P, IBM PPDS Auto, Parallel, USB, Option 10 seconds, 30 seconds Off, On Off, Auto 0, (the zero character with a slash) Off, On Off, On Table 2, Table1 Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17 Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17 Standard model: italic, PC 437, PC 850, PC 860, PC 863, PC 865, PC 861, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO8859-15 All other models: Italic, PC 437, PC 850, PC 437 Greek, PC 853, PC855, PC 852, PC 857, PC 866, PC 869, MAZOWIA, Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT., PC 866 UKR, PC-APTEC, PC708, PC720, PC-AR864, PC 860, PC 865, PC 861, PC 863, BRASCSII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO8859-15, PC771, PC437 Slovenia, PC MC, PC1250, PC1251 Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1 1 second, 1.5 seconds, 2 seconds, 3 seconds 14 - EPSON FX-890/FX-2190 6/03