Epson G5150 User's Guide - Page 116
Using Projector E-mail Alerts, PowerLite Pro G5150NL and G5350NL
![]() |
UPC - 010343868984
View all Epson G5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
note If you're a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you're monitoring. 5. Do one of the following: ■ If your network assigns addresses automatically, turn on the DHCP setting. ■ If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address. To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press Enter. 6. When you're done making all necessary changes, select Return, Setup complete, and then Yes to confirm that you want to save the changes. Press Menu to exit. note You can also set e-mail alerts from EMP Monitor (see the EMP Monitor Operation Guide for more information). Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. PowerLite Pro G5150NL and G5350NL 1. Press the Menu button on the remote control, select the Network menu, then press Enter. 2. Choose Network Configuration and press Enter. 116 Managing Projectors
![](/manual_guide/products/epson-g5200wnl-users-guide-746a9ff/116.png)