Epson G6800 Users Guide - Page 165
Setting, Options, Description, Standby Mode, Communication On, Always On, HDBaseT
![]() |
View all Epson G6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Setting Standby Mode Options Communication On Communication Off HDBaseT (PowerLite Pro G6750WU/G6800/G6900WU) Control Communications Description Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port (PowerLite Pro G6750WU/G6800/G6900WU) When the projector is connected to the HDBaseT Transmitter, enables or disables communication from the Ethernet and serial ports on the transmitter; turning on this setting disables the projector's LAN, RS232C, and Remote ports 165
![](/manual_guide/products/epson-g6550wu-user-s-guide-c917d56/165.png)
Setting
Options
Description
Standby Mode
Communication On
Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to
Always On
)
• Communication from the
HDBaseT
port (PowerLite Pro
G6750WU/G6800/G6900WU)
HDBaseT
Control Communications
When the projector is connected
to the HDBaseT Transmitter,
(PowerLite Pro
enables or disables
G6750WU/G6800/G6900WU)
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's
LAN
,
RS-
232C
, and
Remote
ports
165