Epson G6800 Users Guide - Page 198
Solutions When the Image is Not Rectangular, Solutions When the Image Contains Noise or Static
View all Epson G6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Supported Video Display Formats Related tasks Setting the Screen Type Adjusting the Image Position Using Screen Position Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • Adjust the image shape using the Geometric Correction menu settings. Parent topic: Solving Image or Sound Problems Related concepts Image Shape Related references Projector Feature Settings - Settings Menu Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: • Separated from the power cord to prevent interference • Securely connected at both ends • Not connected to an extension cable • No longer than 10 feet • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings. • Select a computer video resolution and refresh rate that are compatible with the projector. • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the Tracking and Sync settings. • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal. • If you connected through the DisplayPort, change the DisplayPort EQ Setting in the Signal menu. 198