Epson Home Cinema 2100 Quick Setup and Warranty - Page 1

Home Cinema 2100/2150 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Video device or computer Connect one end of an HDMI cable to one of the projector's HDMI ports and the other end to an HDMI port on your video device or computer. Note: For information on connecting the projector to your computer or other devices (camera, USB flash drive, etc.), see the online User's Guide. HDMI cable Powered speakers or headphones 3.5 mm stereo mini cable Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns blue. 3 Open the A/V Mute slide all the way. Mobile media device Connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI1 MHL port. MHL cable Streaming device Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information. Note: For information on wireless screen mirroring (Home Cinema 2150), see the online User's Guide. Connect audio Built-in speaker The projector has a built-in speaker that can play audio from a video source (DVD player, streaming device, etc.) connected by an HDMI cable. External audio device You can also play audio through an external audio device by connecting the projector to your home theater receiver or directly to external speakers. Note: Connecting an external audio device disables the projector's internal speaker. If you do not hear sound from an HDMI source, set the connected device to PCM output. Home theater system Video source 4 Press the power button on the projector or remote control. The status light flashes blue and then stays on. Note: To shut down the projector, press the power button twice. 5 Use the arrow buttons on the remote control to highlight any options on the Home screen that appears, then press Enter to select it. You can switch between projection sources and quickly access various adjustment options from this screen. 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Surround sound Receiver Video cable Projector Note: See your home theater receiver documentation for more information on connections.