Epson L-1000 User Manual - Page 106
Installing the board, Appendix A-7, FG wire not attached
View all Epson L-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
The Interface Boards Note: Two screws are labelled CG. Be sure to remove the one indicated in the illustration below. Installing the board There are two basic types of interface board designs-the frame ground (FG) wire is attached for one type and not attached for the other. This difference does not affect the operation of the interface in any way. 1. If the interface board comes with an FG (frame ground) wire that is not already attached to the board, attach the wire as shown below on the left. FG wire not attached FG wire attached Appendix A-7
The Interface Boards
Note:
Two screws are labelled CG. Be sure to remove
the
one
indicated in the illustration below.
Installing the board
There are two basic types of interface board designs-the frame
ground (FG) wire is attached for one type and not attached for the
other. This difference does not affect the operation of the interface
in any way.
1.
If the interface board comes with an FG (frame ground) wire
that is not already attached to the board, attach the wire as
shown below on the left.
FG wire not attached
FG wire attached
Appendix A-7