Epson LabelWorks Iron-on Kit User Manual - Page 23
Applying Iron-On labels
View all Epson LabelWorks Iron-on Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Applying Iron-On labels Use only label cartridges with this mark: . You can attach labels to the following types of fabric: ■ 100% cotton ■ 100% linen ■ 100% polyester ■ cotton/polyester blends ■ fabrics with a flat, smooth surface Do not use textured fabrics such as terry cloth, corduroy, or flannel; roughly woven fabrics; fabrics with a rough surface such as denim; waterproof fabrics; or fabrics which require a cool iron. Attaching your labels Press the entire label firmly, avoid the steam vents, and do not use a press cloth. 1. Set your iron to 284-320 °F (140-160 °C), without steam. 2. Make sure the area where you want to attach the label doesn't have any wrinkles. 3. Place the label in the desired location with the printed side up. 4. Gently press the iron down on one end of the label to temporarily attach it in place. 5. Press the iron firmly down on the entire label, holding the iron still for about 10 to 15 seconds. To make sure the label adheres securely, repeat this step 3 or 4 times. Applying Iron-On labels | 21