Epson M-Tracer MT500GII Start Here - Page 2

Meaning of Status LEDs, Charging the Battery, Connecting to a Mobile Device

Get Epson M-Tracer MT500GII PDF manuals and user guides View all Epson M-Tracer MT500GII manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Meaning of Status LEDs Status Turning on Communicating Turning off No battery power Pairing mode Error Hardware error Display The blue LED turns on for one second and flashes once every two seconds. The blue LED flashes twice every two seconds. The blue LED turns on and then turns off. The red LED flashes once every 5 seconds. When turning on, the blue LED is on for one second, then the red LED flashes once. The blue and red LED flash alternately. The red LED flashes once a second. The red LED turns on for five seconds and then turns off for half a second repeatedly. Please refer to the in-app help for additional information about the LED display. 2. Charging the Battery Before using your product for the first time, make sure the battery is fully charged. To charge the product, insert the USB plug into a power source. You can use: • Optional USB AC adapter (part number: E12E204001) • Computer (using a USB port) Turn off the product before charging. Micro charging USB cable (AC adapter not included) The orange LED turns on when the product is charging and off when charging is complete. NOTE • Stop charging the product even when charging is not finished after 3 hours. • The battery may not charge correctly if you are using a charger other than the specified AC adapter. • Charging may not finish if your computer is in Sleep or Stand-by mode. • Connect the micro USB charging cable directly to your computer, not to a USB hub. 3. Connecting to a Mobile Device To use this product, you need to pair it to a mobile device using a Bluetooth connection. 1 Place the product within 3 feet (1 m) of the mobile device. 2 With the product turned off, hold down the power button for at least five seconds to turn on the product and enter pairing mode. When the product is in pairing mode, the status LED flashes blue and red alternately. 3 Turn on Bluetooth on your mobile device. Example: [Settings] - [Bluetooth] - [ON] 4 On your mobile device, tap "MT + last 5 digits of the serial number" in the list of detected Bluetooth devices. (Example: MT12345) When pairing is complete: iOS, the status LED flashes blue twice every two seconds. Android, the status LED continues flashing blue and red alternately. Your mobile device displays "MT + last 5 digits of serial number" as a detected device. NOTE The serial number is printed on the sticker on the back of the product. If you plan to use the product with different mobile devices, you'll need to pair again.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Meaning of Status LEDs
Status
Display
Turning on
The blue LED turns on for one second and flashes
once every two seconds.
Communicating
The blue LED flashes twice every two seconds.
Turning off
The blue LED turns on and then turns off.
No battery power
The red LED flashes once every 5 seconds.
When turning on, the blue LED is on for one second,
then the red LED flashes once.
Pairing mode
The blue and red LED flash alternately.
Error
The red LED flashes once a second.
Hardware error
The red LED turns on for five seconds and then
turns off for half a second repeatedly.
Please refer to the in-app help for additional information about the LED display.
2. Charging the Battery
Before using your product for the first time, make sure the battery is fully charged. To charge
the product, insert the USB plug into a power source.
You can use:
• Optional USB AC adapter (part number: E12E204001)
• Computer (using a USB port)
Turn off the product before charging.
Micro charging USB cable
(AC adapter not included)
The orange LED turns on when the product is charging and off when charging is
complete.
NOTE
• Stop charging the product even when charging is not finished after 3 hours.
• The battery may not charge correctly if you are using a charger other than the specified
AC adapter.
• Charging may not finish if your computer is in Sleep or Stand-by mode.
• Connect the micro USB charging cable directly to your computer, not to a USB hub.
3.
Connecting to a Mobile Device
To use this product, you need to pair it to a mobile device using a Bluetooth
connection.
1
Place the product within 3 feet (1 m) of the mobile device.
2
With the product turned off, hold down the power button for at least five
seconds to turn on the product and enter pairing mode.
When the product is in pairing mode, the status LED flashes blue and red
alternately.
3
Turn on Bluetooth on your mobile device.
Example: [Settings] - [Bluetooth] - [ON]
4
On your mobile device, tap “MT + last 5 digits of the serial number” in the list
of detected Bluetooth devices.
(Example: MT12345)
When pairing is complete:
iOS, the status LED flashes blue twice every two seconds.
Android, the status LED continues flashing blue and red alternately. Your mobile
device displays “MT + last 5 digits of serial number” as a detected device.
NOTE
The serial number is printed on the sticker on the back of the product.
If you plan to use the product with different mobile devices, you’ll need to pair again.