Epson Moverio BT-300 FPV-Drone Edition Users Guide - Page 14
Charging, Connect the headset and the controller., Connect the controller and AC adapter.
View all Epson Moverio BT-300 FPV-Drone Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
01_Chapter title 0C1h_aHrgeiandgA 0T2h_e_pleraodduct is not fully charged at the time of purchase. Charge before use. This section explains how to charge using the AC adapter. Initial charging takes approximately 5 hours. A Connect the headset and the controller. Insert the controller connector into the controller's headset connection port until it clicks. Do not connect the controller connector to any other devices except for the product. Getting Ready B Connect the controller and AC adapter. Connect the controller and the AC adapter with the USB cable. C Plug in the AC adapter. The LED indicator flashes light blue. If the battery is dead, the LED indicator does not turn on for a while when charging starts. Charge for at least 30 minutes, and then re-connect the USB cable. 14