Epson Moverio BT-300 FPV-Drone Edition Users Guide - Page 19
Removing the Shade, Attaching the Shade, Attaching and Removing the Shade
View all Epson Moverio BT-300 FPV-Drone Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
01_Chapter title 01At_taHcheinagdanAd Removing the Shade 0Itfh2iet_is_shlteaoadodeb. right to view the screen when wearing the headset, attach ˙■Attaching the Shade Tilt the shade, and then push the protruding section into the headset until it clicks into place. Getting Ready ˙■Removing the Shade Raise the bottom edge of the shade and pull carefully down while pressing the center of the shade to remove. If the shade is pushed or pulled with too much force, the shade and the lens could be damaged. Do not use too much force on the shade. 19
19
01_Chapter title
Getting Ready
19
■
Removing the Shade
Raise the bottom edge of the shade and pull carefully
down while pressing the center of the shade to remove.
If the shade is pushed or pulled with too much force,
the shade and the lens could be damaged. Do not use
too much force on the shade.
Attaching and Removing the Shade
If it is too bright to view the screen when wearing the headset, attach
the shade.
■
Attaching the Shade
Tilt the shade, and then push the protruding section into
the headset until it clicks into place.