Epson Moverio BT-40S Users Guide - Page 3

Difficult to View the Screen in Bright Surroundings You can view the screen easily by attaching the shade supplied. The shade is magnetic and can be attached and removed easily. Cleaning the Headset • If you can see dirt on the screen or if it is foggy, check the lens for dirt such as dust or fingerprints. If there is any dust or dirt attached to the lens, wipe it off with a soft cloth. When wiping the lens, do not use liquids such as lens cleaning solutions or organic solvents. • If anything except for the lens is dirty, wipe off the dirt with a wet tissue. Do not use a tissue moistened with alcohol-based cleaning liquid. When Wearing over Glasses You can wear the headset even if you wear glasses. • Make sure that you do not scratch the headset or your glasses when wearing them. • The headset cannot be worn over glasses that are wider than approximately 144 mm (5.7 inches). • You may not be able to wear the headset over the glasses depending on the shape of your glasses. The nose pad for glasses is worn on the nose from over the glasses. When the Accuracy of the Headset's Sensor is Low If the accuracy of the sensor is low in apps that use the headset's geomagnetic sensor, wave the headset in a figure 8 shape while a smart device or Intelligent Controller is connected to calibrate the sensor. Replacing Nose Pad When replacing the nose pad, be sure to purchase the option for the BT-40. Pull the nose pad straight towards you to remove and replace them. Support Information The following Website provides information on app development and firmware updates for this product. https://tech.moverio.epson.com/en/