Epson MovieMate 72 User's Guide - Page 44
Viewing Status Information and Resetting the Lamp Timer - lamp replacement
View all Epson MovieMate 72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
You can adjust the following items: ■ Video Signal: Normally, you can leave this set to Auto when using external equipment. If no image appears or you see interference, select the appropriate signal. ■ Child Lock: Turn this setting on to lock the page 40 for more information. button on the control panel. See ■ High Altitude Mode: Turn this setting on if you use Epson MovieMate at an altitude above 4900 feet (1500 meters), to ensure that Epson MovieMate does not overheat. 4. Press or to adjust the setting. 5. Press to exit the menu. Viewing Status Information and Resetting the Lamp Timer You can use the Info page on the Visual Setup menu to view the number of hours the lamp has been used, and to reset the timer after you install a new lamp. You can also view video signal information and error codes for any problems that occur. 1. Press on the remote control. You see the Visual Setup menu. 2. Press to highlight Info, then press information. to display the lamp usage and other Note: If the lamp has been used less than 10 hours, 0H is displayed. 3. To reset the lamp timer after replacing the lamp, press . 4. Press to exit. 44 Doing More with Epson MovieMate