Epson PowerLite 1284 User Manual - Page 41
Selecting the Connected USB Source, Connecting to External USB Devices
View all Epson PowerLite 1284 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projector's USB-A port. PowerLite 1224/1264 PowerLite 1284 Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Related topics Projecting a PC Free Presentation Selecting the Connected USB Source You can switch the projector's display to the source you connected to the USB-A port. 1. Make sure the connected USB source is turned on, if necessary. 2. Press the USB button on the remote control. 41
2.
Connect the USB cable (or USB flash drive or USB memory card reader) to the projector's
USB-A
port.
PowerLite 1224/1264
PowerLite 1284
Note:
Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3.
Connect the other end of the cable (if applicable) to your device.
Parent topic:
Connecting to External USB Devices
Related topics
Projecting a PC Free Presentation
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to the
USB-A
port.
1.
Make sure the connected USB source is turned on, if necessary.
2.
Press the
USB
button on the remote control.
41