Epson PowerLite 1725 Quick Setup - Page 1

PowerLite® 1725/ 1 735W Quick Setup 1 Turn On Your Equipment Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Open the A/V Mute slide (lens cover). Make sure the slide is opened completely. 3 Remove the battery cover on the remote control. Locate the two AA batteries that came with the projector and insert them. Then replace the battery cover. 4 To turn the projector on, press the Power button on the projector or the remote control. The projector beeps once, and the projector's Power light flashes green and then stays on. Power light Power button To shut down the projector, press the Power button twice and simply unplug it. You don't have to wait for the projector to cool off. 2 Adjust the Image 1 To raise the image, press the foot release button for the front adjustable foot and lift the front. Release the button to lock the foot in position. *411482900* *411482900*