Epson PowerLite 1725 Quick Setup - Page 3
in the Windows Control Panel. In Windows Vista - - lcd projector
View all Epson PowerLite 1725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 If your projector and notebook don't display an image, do the following: Windows: Hold down the Fn button on the keyboard and press the CRT/LCD or function key. If this doesn't work, double-click Display in the Windows Control Panel. In Windows Vista® , right-click on the desktop and select Personalize, then select Display Settings. Make sure both the LCD screen and monitor port are enabled. See your Windows online help for details. Mac OS® X: From the Apple® menu, select System Preferences, then click Display or Displays. Click Detect Display. Select the VGA Display or Color LCD dialog box, click the Arrangement (or Arrange) tab, and make sure Mirror Displays is checked. If projecting wirelessly... Follow the steps in this section to project over an 802.11g, 802.11b, or 802.11a wireless network from a computer running Windows 2000, XP, or Windows Vista, or Mac OS X 10.3 or later. Your computer must have a wireless card or built-in wireless interface. You can also project wirelessly by using the Network Projector function in Windows Vista. See the User's Guide for instructions. 1 Turn the projector over and unscrew the wireless module cover. 2 Remove the wireless module cover. 3 Install the wireless LAN module. Then replace the cover and screw. 4 Turn on the projector and adjust the image as described in sections 1 and 2 on the front of this sheet. 5 Do one of the following: • To use Quick Wireless Connection, follow the steps below (Windows only). • To use EasyMP®, see "Using EasyMP" (Windows and Mac OS). 6 Connect the USB key (located in a pocket inside the projector's case) to the projector's Type A (flat) USB port. 7 When you see a projected message that the network information update is complete, remove the USB key. 8 Connect the USB key to a USB port on your Windows computer or notebook. If you see the AutoPlay window in Windows Vista, select Run Launch U3.exe. Then select Allow. 9 When you see a license agreement, click Agree to install the Quick Wireless Connection driver. If you see a Firewall message, select Yes to disable the Firewall. After a few moments, your computer display is projected. If not, restart your computer. 10 When you're done with your presentation, remove the USB key.