Epson PowerLite 1955 Quick Setup - Page 1

PowerLite® 1945W/1955/1965 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer DisplayPort cable VGA cable USB cable HDMI cable USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® 2000 SP4 or later: After turning on the projector, follow the on-screen instructions to install the EPSON® USB Display software (EMP_UDSE.EXE; only on first connection). Note: If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the EPSON USB Display software (only on first connection). Monitor port Connect one end of a VGA cable to the projector's Computer1 or Computer2 port, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. HDMI port Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your computer. DisplayPort Connect one end of a DisplayPort cable to the projector's DisplayPort and the other end to a DisplayPort on your computer. Wired network You can connect the projector to your network using an Ethernet® cable. Video device Connect up to 4 video devices and use the Source Search button on the projector or remote control to switch between them. RCA video cable (composite video) Audio cable Component video to VGA cable Audio cable HDMI cable Camera or USB device Connect a digital camera, USB flash drive, or USB storage device to the projector's USB-A (flat) port. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature to project images. See the online User's Guide for details. EPSON document camera DC-06 Connect an EPSON document camera DC-06 to the projector's document camera USB (flat) port. External monitor and external speakers You can also connect an external monitor and external speakers to your projector to enhance your presentations. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. See "Project over a wired network" for instructions. *412290400* *412290400*