Epson PowerLite 1980WU Quick Setup - Page 2
Adjust the image, Using the remote control, Project wirelessly
View all Epson PowerLite 1980WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Open the A/V Mute slide all the way. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 4 Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on. Turn projector on and off Choose which source to display Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the zoom ring to reduce or enlarge the image. WT 4 Turn the focus ring to sharpen the image. Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the steps here to connect the projector wirelessly over an 802.11n, 802.11g, or 802.11b wireless network. Your computer must have a wireless card or built-in wireless interface, and be running Windows 8.x, Windows 7, Windows Vista®, Windows XP Professional x64, Windows XP, or Windows 2000, or OS X 10.5.8 to 10.9. 1 To install the optional wireless LAN module, open the air filter cover. 2 Remove the screw securing the wireless LAN module stopper, then remove the stopper. 5 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct it. 3 Install the wireless LAN module.