Epson PowerLite 5000 User Manual - Page 79
Type A:\SETUP or B:\SETUP as appropriate, then press Enter
View all Epson PowerLite 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
2. In the Windows Program Manager, click on the File menu, then on Run. The Run dialog box appears: 3. Type A:\SETUP (or B:\SETUP as appropriate), then press Enter or click OK. The ELP Link II introduction appears. 4. Press C to continue. 5. To accept the default location for where the software should be installed, press C to continue. Otherwise, enter a new directory name and then press C. 6. The Link II software communicates with the projector using the computer's serial communication (COM) port. Specify which COM port to use, then press C to continue. (Most likely, your computer is using COM 1.) 7. A summary screen appears stating how much free hard disk space is required to run the software and how much is available. If sufficient disk space is available, press C. Otherwise, press X (exit) to free up some disk space; then restart the installation program from step 1. Installing the Software