Epson PowerLite 50c Quick Start - Page 1

TART S HERE Locate everything you'll need For most setups, you'll need just these two cables: EPSON® PowerLite® 50c/70c Quick Setup power cord computer cable You won't need to install any software. Connect the projector to your laptop 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer port on the projector. Follow these instructions to connect the projector to your laptop. To connect other devices, such as a VCR or desktop PC, see your User's Guide. 3 Connect the other end to your laptop's video or monitor port. Plug in your projector Connect the power cord to your projector and plug the other end into a grounded outlet. Turn on your equipment Power Help 1 Turn on the projector first. To do so, press the red Power button. The power light flashes green as the projector warms up, ? and the projection lamp comes on in about 30 seconds. 2 Turn on or restart your laptop. (Windows® only: If you see a New Hardware Wizard screen, click Cancel.) power button power light Caution: Before unplugging the projector... Press the red Power button twice, then let the projector cool while the power light flashes orange (about a minute). Once the light stops flashing and stays on, it's safe to unplug the projector. Never unplug the projector when the power light is green or flashing orange. Turn Over