Epson PowerLite 50c Quick Start - Page 2
Adjust the image, If You See a Blank Screen - lcd projector
View all Epson PowerLite 50c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Adjust the image 1 Remove the lens cap and rotate the focus ring to sharpen the image. focus ring EPSON PowerLite 50c/70c 2 Raise the image as needed. To do this, pull up the blue foot release levers and lift the front of the projector. Once the image is positioned where you want it, release the levers to lock the feet in position. Note: If you see a blank screen after focusing, see the box below. No signal 3 If your image looks like or , you've placed the projector at an angle to the screen. Move it directly in front of the center of the screen, facing the screen squarely. 4 If your image looks like or , press the + or - side of the Keystone button to correct the shape of the image. If You See a Blank Screen If you see a blank screen or the No Signal message after turning on your laptop, check the following: Make sure the power light is green and not flashing and the lens cap is off. No signal Try turning off the laptop and restarting it. If you've connected more than one computer and/or video source, you may need to press the Source button on top of the projector. (Allow a few seconds for the projector to sync up after pressing it.) If you're using a Macintosh®: 1. From the Apple menu, select Control Panels, then click Monitors and Sound. 2. Click the Arrange icon. click here drag one monitor icon on top of the other If you're using a Windows laptop: Press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. You may have to hold down the Fn (function) key while pressing it. (Allow a few seconds for the projector to sync up after pressing the key.) Check your laptop's manual or online help for details. On most systems, the or CRT/LCD key let you toggle between the LCD screen and the projector, or display on both at the same time. 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. If this option isn't available, you may need to select one of the Simulscan resolution settings: 1. Perform step 1 above, if necessary. 2. Click the Monitor icon. click here You might need to use the Display utility in the Control Panel to enable both the LCD screen and external monitor port. select a Simulscan resolution EPSON PowerLite 50c/70c 3. Select a Simulscan resolution as shown. (Allow a few seconds for the projector to sync up after making the selection.) EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc. Copyright © 2001 by Epson America, Inc. 1/01 CPD-11579