Epson PowerLite 62c User's Guide - Page 63
Pnote, projector over a network and perform other network
View all Epson PowerLite 62c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
■ Projection Front: Projector is in front of the screen. Front/Ceiling: Projector is in front of the screen, mounted upside-down from the ceiling. Rear: Projector is behind the screen. Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling. ■ Operation note Direct Power: When this feature is enabled, projection starts When Direct Power as soon as you plug in the power cord. You don't have to press the P Power button. Sleep Mode: When Sleep Mode is on, the projector turns off the lamp if it has not received any input signals for 30 is turned on, press the P Power button to turn the projector off, wait until the P power light turns a steady orange, then unplug minutes. the power cord. High Altitude Mode: When using the projector at an altitude above 4,921 feet, turn this setting on to ensure that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations. ■ Standby Mode: Set to Network ON to monitor your projector over a network and perform other network functions when the projector is in standby mode. ■ COM Port Turn on USB only if you're controlling the projector from a computer with the EMP Link 21L software. This software can be downloaded from the Epson website at support.epson.com. (You must turn the projector off and then on again to use the new setting.) ■ Language Select the language to be used for the projector menus. 4. When you're finished, press Esc or Menu. Fine-tuning the Projector 63