Epson PowerLite 713c Installation Guide - ELPMBUNI Universal Mount Assembly - Page 14

ELPMBUNI Securing the Upper Assembly Ceiling Plate 1. Review your projector's distance calculation to determine what distance is recommended from the front of the lens to the edge of the screen for best picture ratio. 2. Locate the inverted projectors top of the lens point to a point centered horizontally on the screen and no higher then the top image edge of the screen). 3. It is normally better to have the top edge of the lens as close to parallel with the top image edge of the screen as well. 4. Before you mount your screen and projector, make sure the mounting location will safely support the weight of the projector. NOTE: Make sure to measure from the center of the mounting bracket to the front edge of the lens to determine the proper placement of the center of the upper assembly. NOTE: If installing the security kit (ELPMBSEC), please refer to the security kit installation guide before attaching the ceiling plate to the ceiling or wall. 5. Secure the ceiling assembly into a solid wood ceiling stud with the three (3) #14 x 2" wood screws (supplied) or with other (commercially available) hardware depending on your installation environment (Figure 9). Ceiling Structure Ceiling Wood Stud Wood Screws Upper Assembly Installation Manual Knurl Knobs (3ea) Figure 9 Secure the ceiling mount to the center of the wood stud. Page - 15 -