Epson PowerLite 713c Product Information Guide - Page 7

EPSON PowerLite 503c/713c Projector This table summarizes the functions on the remote control. Button Power Freeze A/V mute E-Zoom R/C ON/OFF Button 1 Button 2 Button 3 Button 4 Button 5 Enter (pointer button) Light Esc Menu Help Comp S-Video Video Auto Resize P in P - Volume + Function Starts or stops the projector. Keeps the current computer or video image on the screen. Turns off the audio and video, displaying the black, blue, or user logo background. Press again to turn it back on. Enlarges or reduces the image size from 1x to 4x (in 12 steps). Pressing the right side of the button enlarges the image, pressing the left side of the button reduces the image. To display a portion of an enlarged image which is outside the display area, press the Enter button and scroll the image to the desired location. Turns the remote control on or off. Places a pointer or cursor stamp on the screen. Draws a box highlight. Draws a horizontal or vertical bar. Draws a freehand line. Erases highlighting effects. Use the Enter button to navigate in menus or to use the remote as a mouse pointer when the projector is connected to a computer with the mouse cable. The Enter button acts as a mouse left-click. Illuminates all buttons on the remote control. Stops the current function. Pressing Esc while viewing a menu displays the previous menu. When the image source is Computer, the Esc button acts as a mouse right-click. Displays or hides the menu. Displays the online help menu. Switches to Computer image. Switches to S-video image. Switches to standard composite video source. Optimizes the computer image. Switches the display dot mode and resize mode for VGA, UXGA, SVGA, and SXGA input. Switches the aspect ratio between 4:3 and 16:9 when video images are being projected. Displays a video or S-video image in a subscreen on the main display. Use the Enter button to reposition the Picture in Picture (P in P) screen, or the E-Zoom button to enlarge or reduce the image. Changes made to the P in P screen location and size are automatically carried over to the next P in P session. Adjusts the volume. Note: The projector might not respond to remote control commands in these conditions: the remote control ON/OFF switch is in the OFF position; batteries are weak; ambient light is too bright; a certain type of fluorescent light is present; a strong light source (such as direct sunlight) shines into the infrared receiver; or other equipment emitting infrared energy is present (such as a radiant room heater). Correct these conditions to use the remote control. Using the Buttons Power Help Source Keystone Enter Select The following table summarizes the functions of the buttons on top of the projector. Button Power Help Source Enter - Keystone + Select Function Starts or stops projection. Displays the online help menu. Switches between Computer, Video, and S-video sources. Selects a menu option when the Help menu is displayed. Adjusts a trapezoid distorted image to normal, correction up to a ±15° tilt. Scrolls through options when the Help menu is displayed. 9/01 EPSON PowerLite 503c/713c Projector - 7