Epson PowerLite 715c Quick Start - Page 2

Adjust the image Note: If you see a blank screen No signal , see the instructions in the box below. 1 Rotate the focus ring to sharpen the image. keystone button lens ring EPSON PowerLite 505c/715c 3 Raise the image as needed. To do this, pull up the blue foot release levers and lift the front of the projector. Once the image is positioned where you want it, release the levers to lock the feet in position. focus ring 2 Rotate the lens ring if you need to reduce or enlarge the image. (You can also move the projector closer to or farther from the screen.) 4 If your image looks like or , you've placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks like or , press the + or - side of the Keystone button on top of the projector to correct the shape of the image. If You See a Blank Screen If you see a blank screen or the No Signal message after turning on your laptop, check the following: Make sure the power light is green and not flashing and the lens cover is off. No signal Try turning off the laptop and restarting it. If you've connected a computer and video source, you may need to press the Source button on top of the projector. (Allow a few seconds for the projector to sync up after pressing it.) Make sure the computer cable is securely connected at both ends. If you're using a Windows laptop: Hold down the Fn key on your keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. (Allow a few seconds for the projector to sync up after pressing it.) You might need to use the Display utility in the Control Panel to enable both the LCD screen and external monitor port. If you're using a Macintosh: 1. From the Apple menu, select Control Panels, then click Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. If this option isn't available, you may need to select one of the Simulscan resolution settings: 4. Click the Monitor icon. 5. Select a Simulscan resolution. (Allow a few seconds for the projector to sync up after making the selection.) Presenting Without A Computer EasyMP lets you run your presentation from the projector. Simply convert your PowerPoint® file into a "scenario" with the EMP SlideMaker software on your computer. Then download your scenario to the projector's memory card. If your scenario is set to autorun, it will start when you turn on the projector. You can present it with the remote control. 1. Make sure the remote control has batteries. 2. Push up the switch on the side of the remote control to turn it on. Press Enter to display the next slide. ON/OFF switch Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Press Esc to display the previous slide. EEnntter If your scenario is not set to autorun, start it by following these steps: 1. Press the EasyMP button on the remote control. You see the EasyMP main screen. 2. Use the Enter button on the remote control to highlight your scenario (SIT) file. Esscc Menu Help Comp 1 EasyMP Video Auto Resize P in P - Volume + 3. Press Enter. In a moment, your presentation begins. Press Enter to display the next slide. Press Esc to display the previous slide. 4. To exit, press the EasyMP button on the remote control. You see a confirmation message. 5. Press Enter to exit. You return to the EasyMP main screen. See your User's Guide for more information about presenting without a computer. EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc. Copyright © 2001 by Epson America, Inc. CPD-11737