Epson PowerLite 765c User's Guide - Page 86
Inserting a Memory Card in the Projector, Removing a Memory Card
View all Epson PowerLite 765c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
note If a digital camera is connected to the projector, disconnect it before inserting the memory card. The memory card is not functional when a digital camera is connected. caution Never force the card into the slot; you could damage the projector. Inserting a Memory Card in the Projector Follow these steps to insert the memory card in the projector: 1. If necessary, insert the card into a PC card adapter. (ATA flash cards don't require an adapter.) 2. Insert the card (with the adapter) into the projector with the label facing up. The projector does not have to be turned off before inserting the card. Eject button note If you are using CardPlayer, highlight the EJECT button and press Enter on the remote control. Then wait for the indicator light to go off before you eject the card. Removing a Memory Card When you're done using the projector and want to remove the memory card, follow these steps. 1. Make sure the card is not in use (the indicator light next to the card slot should be off). 2. Press the eject button above the card slot. The button pops out. 3. Press the button again. The memory card is released, and you can remove it from the slot in the projector. 4. To remove the card from the adapter, pull it out as shown: 86 Presenting from a Memory Card, Digital Camera, or External Drive