Epson PowerLite 81p Operation Guide - EasyMP Monitor v4.40 - Page 7

Installing EasyMP Monitor 7 Installing EasyMP Monitor Operating environment This software is compatible with computers that comply with the following requirements. OS CPU Memory capacity Free hard disk space Display Windows 98 Second Edition SP1 Windows Me Windows NT4.0 SP6 Windows 2000 Professional SP4 The following 32-bit operating systems: Windows XP Home Edition SP2/SP3 Windows XP Professional SP2/SP3 Windows Vista (All editions except Starter Edition) Windows Vista SP1/SP2 (All editions except Starter Edition) Windows 7 (All editions except Starter Edition) Internet Explorer Ver. 5.0 or later must be installed. Pentium MMX 166 MHz or higher (Pentium II 233 MHz or higher recommended) 64 MB or more (128 MB or more recommended) 50 MB or more SVGA (800 x 600) or higher resolution, 32 bit or higher display color • Macintosh computers cannot be used. • Operations carried out at the computer may become slow depending on the number of projectors being managed. If this happens, use a computer with higher specifications. • EasyMP Monitor cannot be used in environments which do not allow pings to be transmitted. Supported language EasyMP Monitor supports the following languages. *1 If your OS is Windows Vista, you must update to Windows Vista SP1 to use the Ukrainian version of EasyMP Monitor. *2 Windows NT4.0 does not support Arabic and Hebrew versions. Transferring the settings If you are already using EasyMP or EMP Monitor, you can transfer the projector settings to this version. The settings are stored as a data file (EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you install this software. EMP Monitor.dat can be found at the following location if the default settings were used to install the software: