Epson PowerLite 84 Quick Setup - Page 3

Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Turn off projector display and sound Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User's Guide. Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source. • If you're using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. If the projector and notebook don't display the same image... Windows Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn't work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1 From the Windows Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings. 3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.