Epson PowerLite 85 Quick Setup - Page 3
Turn on your equipment, Adjust the image - troubleshooting
View all Epson PowerLite 85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. Power light Power button The power light flashes green, then stays on. NOTE: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position.