Epson PowerLite 982W Quick Setup - Page 2
Adjust the image, Using the remote control, Setting up a wireless connection
View all Epson PowerLite 982W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press to select it. You can switch between projection sources and quickly access various adjustment options from this screen. Using the remote control Install the batteries as shown (two AA batteries). 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 PowerLite E20: To reduce or enlarge the image, press the E-Zoom buttons on the remote control. O ther models: To reduce or enlarge the image, turn the zoom ring. PowerLite E20 Other models 4 To sharpen the image, turn the focus ring. PowerLite E20 Other models 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape. PowerLite E20 Other models 6 PowerLite E20: If your image looks like or , press the or button on the projector to correct it. O ther models: Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. Turn projector on and off Choose which source to display Access projector menus Turn off projector display Navigate projector menus Access the Home screen For more information on using the remote control, see the online User's Guide. Setting up a wireless connection Follow these steps to set up the projector for a wireless network connection. Note: This feature is not available for the PowerLite E20. For more information about using the projector on a network, see the online User Guide. Install the optional LAN module (PowerLite X49/ W49/118/119W/982W) To project wirelessly with the PowerLite X49/W49/118/119W/982W, you need to install the optional wireless LAN module (V1ZH005A02). You don't need the wireless LAN module for the PowerLite 992F/1288 since the wireless functionality is built-in and can skip to "Select wireless network settings" for these models. 1 Remove the wireless LAN module cover screw. 2 Insert the wireless LAN module into the USB-A port. 3 Attach the included wireless LAN module cover and secure it using the screw you removed. Note: The light on the wireless LAN module turns on when the module is installed and operating. The light flashes when the module is communicating over the network.