Epson PowerLite 982W Quick Setup - Page 3
Setting up a wired connection, Using web remote
View all Epson PowerLite 982W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Select wireless network settings 1 Press the Menu button on the remote control. 2 Select the Network menu and press . 3 Select On as the Wireless LAN Power setting. 4 Select Network Configuration and press . 5 Select the Wireless LAN menu and press . 3 Select the Basic menu and press . 4 Select the Projector Name setting and enter a name (up to 16 characters long) to identify your projector over the network. Use the displayed keyboard to enter characters. Press the arrow buttons on the remote control to highlight the characters and press to select them. Note: See the online User's Guide for information on adding passwords. 5 Select the Wired LAN menu and press . 6 Select one of the following as the Connection Mode setting: •• Quick for a direct connection to a computer, tablet, or smartphone. •• Advanced to connect your projector to a router or access point. 7 Select any other settings on the Wireless LAN menu as necessary. See the online User's Guide for details. 8 When you are finished, select Complete and follow the on-screen instructions to save your settings and exit the menus. Install the optional software If you connected a computer to the projector, you can download and install optional software to perform various tasks wirelessly, such as monitoring or controlling your projector and projecting from multiple computers. You can download the optional software and its manuals from the Epson website, as described in "Where to get help". Setting up a wired connection Follow these steps to set up the projector for a wired network connection. Note: This feature is not available for the PowerLite E20/1288. For more information about using the projector on a network, see the online User's Guide. 1 Press the Menu button on the remote control, select the Network menu, and press . 6 Choose IP Settings and press . 7 If your network assigns addresses automatically, turn on the DHCP setting. If not, turn off the DHCP setting and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc. 8 To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off. 9 When you are finished, select Complete and follow the on-screen instructions to save your settings and exit the menus. Using web remote You can use a standard web browser to control the projector through the network. A virtual remote control on your computer screen lets you perform many of the same functions as you can with the physical remote control. Note: This feature is not available for the PowerLite E20. 1 Open your web browser and enter the IP address of the projector you want to monitor in the browser's address box. If you're not sure what the IP address of the projector is, turn the projector on and select Net. Info. - Wired LAN or Net. Info. - Wireless LAN from the Network menu to display the IP address of the projector. (Do not enter the leading zeroes.) 2 Enter EPSONWEB as the user name and admin as the password, then click OK. The Epson Web Control menu opens. 3 Select Basic Control. If you see a login screen, enter EPSONREMOTE as the user name and guest as the password. 4 Use the on-screen buttons to operate the projector, as you would using the remote control. See the online User's Guide for details. Search for sources 2 Select Network Configuration and press . Select image source Turn off picture and sound Adjust volume