Epson PowerLite Cinema 200 User Manual - Page 45
Adjusting the Color, RGBCMY
View all Epson PowerLite Cinema 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Adjusting the Color You can use the Color Adjustment settings to fine-tune the color of the image. If you select RGB as the color mode, you can adjust the offset, gamma, and gain for each signal color (red, green, and blue). Or select RGBCMY to adjust the hue and saturation for each of six colors. 1. Select Picture Quality, then click Adjustment of image. 1. Select Picture Quality 2. Click Adjustment of image 3. Select the color mode 4. Click Adjust 2. Select one of the following color modes, then click Adjust. ■ RGB: Lets you adjust the offset, gamma, and gain for each signal color. Use Offset to adjust darker shades, Gamma for intermediate shades, and Gain for the lightest shades. ■ RGBCMY: Lets you adjust the hue and saturation for each of six colors, as shown on the color palette below. After moving a slider bar, click Apply. Adjust the hue (red, green, blue, cyan, magenta, yellow) Adjust the saturation 45