Epson PowerLite Home 10 Start Here Card - Page 4
Plug in and turn - + lamp
View all Epson PowerLite Home 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 Plug in and turn on 1 Remove the lens cover. 2 Connect one end of the power cord to the projector and plug the other end into an electrical outlet. The power light turns orange. Power light 3 Turn on your equipment. (If you are connecting to a computer, don't turn it on yet. Wait until you've turned on the projector.) 4 Press the Power button on the projector or remote control. You hear a beep, the power light flashes green, and the projector lamp comes on in about 45 seconds. Power button The projector automatically detects your video source and begins projecting. Turning off the projector 1 When you're finished using the projector, turn off your video equipment. 2 Press the Power button on the projector or remote control. 3 When you see the confirmation message, press the Power button again. The power light flashes orange as the projector cools down. 4 When the power light is a steady orange, unplug the projector. 5 Store the remote control in its holder on the back of the projector. (Part of the remote control will stick out when it's fully inserted.) Caution: Never unplug the projector when the power light is green or flashing orange.