Epson PowerLite Home Cinema 3600e Quick Setup - Page 1
Epson PowerLite Home Cinema 3600e Manual
View all Epson PowerLite Home Cinema 3600e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PowerLite® Home Cinema 3000/3500/3510/3600e Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: These illustrations show the PowerLite Home Cinema 3600e, but the instructions are the same for the PowerLite Home Cinema 3000/3500/3510 unless otherwise noted. 3 Connect the HDMI cables to your video input devices and the HDMI ports on the side and back of the WirelessHD Transmitter. You can connect up to five input devices to the transmitter. See "Viewing WirelessHD content" for information on switching between input sources Connect the projector Choose from the following connections. For additional connection types, see the online User's Guide. Note: To access the rear ports on the PowerLite Home Cinema 3600e, remove the cable cover by using coins or your fingernails to lift up and out on the gaps at the bottom of the cable cover. Note: You can connect tablets, smartphones and other devices that support the MHL standard to the HDMI port on the side of the WirelessHD Transmitter. Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information. 4 To use the transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and the HDMI output port on the rear of the transmitter. See "Viewing WirelessHD content" for information on switching between wireless and wired display modes. Video device Connect up to 4 video devices and use the Source buttons on the remote control or the button on the projector to switch between them. HDMI cable RCA video cable Component video cable Mobile media device (PowerLite Home Cinema 3500/3510/3600e) Connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI 1/MHL port using a MHL compatible cable. Connect audio Built-in speaker (PowerLite Home Cinema 3500/3510/3600e) The projector has a built-in speaker that can play audio from a connected video source (DVD player, streaming device, etc.) using an HDMI connection. If you do not use an HDMI connection, you can connect your device's audio output to the projector's audio input. HDMI cable MHL cable Note: Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information. WirelessHD (PowerLite Home Cinema 3600e) Follow these steps to set up the included WirelessHD Transmitter. 1 Place the transmitter within 32 feet (10 m) of the projector. Make sure the front of the transmitter faces the front of the projector. See the online User's Guide for more information on the WirelessHD transmission range. Note: Do not place the transmitter on a metal surface, as this may interfere with the signal. Make sure there are no obstructions between the transmitter and the projector. 2 Plug the AC adapter into the transmitter and a wall outlet. Audio cable Audio Out port (PowerLite Home Cinema 3500/3510/3600e) You can connect the projector to external self-powered speakers through the Audio Out port. 3.5 mm stereo mini cable Note: You can also connect external self-powered speakers to the Optical Out port on the WirelessHD Transmitter (PowerLite Home Cinema 3600e). External speakers Connect your device's audio output to your home theater receiver or powered speakers. Note: When outputting sound through an external source, you may need to reduce the projector volume to zero or make sure that the correct audio output is selected on your device to prevent duplicate sound from being heard from the projector (PowerLite Home Cinema 3500/3510/3600e).