Epson PowerLite Home Cinema 3600e Quick Setup - Page 2

Home theater system Video source Surround sound Powered speakers Receiver Video cable Projector External speakers Video source Video cable Projector Note: See your home theater receiver documentation for more information on connections. Turn on your equipment 1 Turn on your video source. 2 Plug in the projector. 2 For the best image quality, place the projector directly in front of the center of the screen, facing the screen squarely. If this is not possible, turn the horizontal and vertical lens shift dials to adjust the image position and center it on the screen. 3 If the image is tilted, adjust the front feet as shown below. 4 Turn the zoom ring to reduce or enlarge the image. 3 Remove the lens cap. 5 Turn the focus ring to sharpen the image. 4 Press the power button on the projector or the On button on the remote control. The power light flashes blue, then stays on. Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control twice. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Settings and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press one of the Source buttons on the remote control or the button on the projector to select the image source. Note: If you still see a blank screen or have other display problems, see "Troubleshooting." 6 If your image is uneven on the sides, you can use the keystone correction feature to adjust the image. To use this feature, you must first set the lens to the center-top position using the lens shift dials. Press the or buttons to display the keystone correction screen. Then press the , , , or buttons to correct for horizontal and vertical keystone distortion.