Epson PowerLite Home Cinema 3700 Users Guide - Page 121

Status light Power light Flashing blue Off Lamp light Temp light Orange Off Blue Blue Flashing blue Off Flashing blue Off Flashing blue Off Flashing blue Off Flashing orange Off Flashing orange Orange Flashing orange Off Flashing orange Flashing orange Orange Off Status and solution Lamp has a problem • Check the Lamp Hours in the Info menu to see if the lamp is burned out. Unplug the projector, wait for the lamp to cool down, and check if it is broken or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • Make sure the lamp cover is closed • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Replace the lamp soon to avoid damage; do not continue using the projector A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help Auto Iris error; turn the projector off, unplug it, and contact Epson for help Power error; turn the projector off, unplug it, and contact Epson for help Internal projector error; turn the projector off, unplug it, and contact Epson for help Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related references Image Quality Settings - Image Menu 121