Epson PowerLite Home Cinema 5025UB Quick Start and Warranty - Page 1

PowerLite® Home Cinema 5025UB Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If this isn't possible, use the lens shift dials or the keystone correction buttons on the projector to reposition the image (see "Adjust the image"). In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet (10 m) of the projector. Use the image below to determine the viewing distance for 3D projection (the shading represents the 3D viewing area): Connect audio Connect your device's audio output to your home theater receiver or powered speakers. Home theater system Video source Surround sound Receiver Video cable Projector Powered speakers See the online User's Guide for more information on where to place your projector. Connect the projector Choose from the following connections. For additional connection types, see the online User's Guide. Video device Connect multiple video devices and use the Source buttons on the remote control or the button on the projector to switch between them. HDMI cable RCA video cable Computer Component video cable HDMI cable VGA cable HDMI port Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your computer. Monitor port Connect one end of a VGA cable to the projector's PC port, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). External speakers Video source Video cable Projector Note: See your home theater receiver documentation for more information on connections. Turn on your equipment 1 Turn on your video source or computer. 2 Plug in the projector. 3 Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on. Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control twice, then unplug it. You don't have to wait for the projector to cool down. 4 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system.