Epson PowerLite Home Cinema 700 Quick Setup - Page 2
Set up the remote control, Plug in and turn
 |
View all Epson PowerLite Home Cinema 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Set up the remote control 1 Remove the battery cover. 2 Insert the batteries. 3 Replace the battery cover. 4 Plug in and turn on 1 Open the A/V Mute slide (lens cover). 2 Connect the power cord to the projector and plug the other end into an electrical outlet. The power light on the projector turns orange. Power light Power button 3 Connect your video source, as described to the right. 4 Turn on your computer or video source. 5 Press the power button on the projector or remote control. The projector beeps, the power light flashes green, and the projector warms up. When the power light stays green, the projector is ready for use. Power button
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
3
Set up the remote control
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
4
Plug in and turn on
1
Open the
A/V Mute
slide (lens cover).
2
Connect the power cord to the projector and plug
the other end into an electrical outlet.
The
power light on the projector turns orange.
3
Connect your video source, as described to the right.
4
Turn on your computer or video source.
5
Press the
power button on the projector or remote control. The
projector beeps, the
power light flashes green, and the projector
warms up. When the
power light stays green, the projector is
ready for use.
Power button
Power button
Power light