Epson PowerLite Home Cinema 700 Quick Setup - Page 6

Troubleshooting If you see a blank screen If you see a blank screen or the No signal message after turning on your computer or video source, check the following:  Make sure the power light on the projector is green and not flashing and the A/V Mute slide (lens cover) is open.  Make sure the cables are connected correctly. (See the User's Guide for more information.)  If you've connected more than one video source, you may need to press the Source Search button on the projector or the Search button on the remote control to select the one you want to watch. (Allow a few seconds for the projector to sync up after pressing it.) If the picture is taller on one side The projector is set at an angle to the screen. Face it squarely toward the screen. Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 7/08 Printed in XXXXXX CPD-26345