Epson PowerLite Home Cinema 740HD User Manual - Page 156

1 Power light 2 Status light 3 Lamp light 4 Temp (temperature) light Power light Blue Blue Blue Flashing blue Status light Blue Flashing blue Off Light status varies Lamp light Off Off Off Light status varies Off Flashing blue Off Temp light Off Off Off Flashing orange Orange Status and solution Normal operation Warming up or cooling down Standby or sleep mode Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. Projector has overheated and turned off. Leave it turned off to cool down. Once the Temp and Status lights turn off and the power light turns blue (after about five minutes), try the suggestions below: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. 156