Epson PowerLite Home Cinema 8345 User Manual - Page 46
Turn off this setting to deactivate the lights on the projector's
View all Epson PowerLite Home Cinema 8345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
■ Direct Power On Settings > Direct Power On Sets projection to start when the main power switch is turned on, without pressing the P power button on the remote control or the projector. Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on. ■ Video Signal Settings > Input Signal > Video Signal Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats). ■ Component Settings > Input Signal > Component Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment's signal. ■ Trigger Out Settings > Trigger Out Turn on this setting to have the Trigger out port output a 12-volt signal to lower your projection screen when the projector is running. Note: If you change this setting, the new setting will take effect the next time you turn the projector on. ■ Illumination Settings > Illumination Turn off this setting to deactivate the lights on the projector's Ppower and buttons. Use this setting if you find the lights distracting in a darkened room. ■ Sleep Mode source Settings > Sleep Mode Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. To turn the projector back on, press the Ppower button on the remote control or the projector. 46 Making Detailed Adjustments