Epson PowerLite Pro Cinema 800 Product Information Guide - Page 3

Epson PowerLite Pro Cinema 800 5.63 in. 5.18 in. 2.08 in. If you place the projector above or below screen level, you'll have to tilt it up or down to aim the image at the screen; this distorts (or "keystones") the shape of the image, but you can correct it using the projector's Keystone function (see page 6). If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift dial to center the image. Do not place the projector farther to the left or right than the edge of the screen, or you will not be able to project a square (or rectangular) image. Caution: To adjust the lens position, make sure you use the lens shift dials. Do not try to move the lens manually, or you may strip the gears. Horizontal lens shift dial Vertical lens shift dial Tip: You can display a test pattern to help you center the image on the screen. Press the Pattern button on the remote control, then select Display Position. You can use the feet to correct the angle of the image if it's tilted. Installing the Projector The illustrations below and in the next column show the dimensions of the projector: 0.45 in. 4.33 in. 15.98 in. 2.32 in. 0.75 in. 11.81 in. 12.17 in. 3 in. 6.3 in. The included projector mount lets you attach the projector to the wall or ceiling in the location that works best for your room. Follow the instructions included with the mount to install the projector, which weighs 11.5 pounds. The wall or ceiling where you install it must be capable of supporting a weight of 58 pounds. If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes below. ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at http://support.epson.com. Following are some of the available codes: Item Power ON/OFF A/V Mute ON/OFF A/V Mute selection ON OFF ON OFF Black Blue User's Logo Command PWR ON PWR OFF MUTE ON MUTE OFF MSEL 00 MSEL 01 MSEL 02 11/05 Epson PowerLite Pro Cinema 800 - 3