Epson PowerLite Pro Z8455WUNL Operation Guide - EasyMP Multi PC Projection - Page 35

Solving Problems 35 Check Remedy Are the access point and the projector's subnet different? Select Manual search from EasyMP Multi PC Projection, and then specify the IP address to connect. s "Manual search" p.18 Does the projector support the EasyMP Multi PC Projection version being used? Install EasyMP Multi PC Projection from the EPSON Projector Software for Meeting & Presentation CD-ROM supplied with the projector. Do you have the latest version of EasyMP Multi PC Projection? Only 16 computers can be connected under either of the following conditions. • When any of the computers is running an older version (Ver. 1.05 or older) of EasyMP Multi PC Projection. Install the latest version of EasyMP Multi PC Projection on all computers when connecting 17 to 32 computers. You can check the EasyMP Multi PC Projection version from Set options. s "Adjust Performance Tab" p.44 • When any of the connected projectors can only connect up to 16 computers. Cannot select the projector Check Are you trying to combine a set of projectors that differs from a combination created by a user who is already connected? Remedy When another user is already connected, you can only connect to the projectors in the combination selected by the other user. Select a projector from the same combination as the user who is already connected, or select a projector that is in standby status.