Epson PowerLite S5 Product Information Guide - Page 10

PowerLite S5 Series / 77c Projector Changing Presentation Slides You can use the remote control to click through slideshow-style presentations (such as PowerPoint®) from up to 20 feet away. This gives you more flexibility, since you don't need to stand near your computer to change slides. To change slides with the remote control, make sure you have connected your computer to the projector with a USB cable. To advance slides in a PowerPoint presentation in Slide Show mode, press the Page up button on the remote control. Press the Page down button to go back a slide. Note: You cannot use the remote control as a mouse. Projector Status Lights The lights on top of the projector indicate the projector's status and let you know when a problem occurs. Power light Lamp light Temperature light If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended in the following table. Power Lamp light light Temp. light Description Flashing red Flashing red Flashing red There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help. Red Off Flashing red There is a problem with the fan or a sensor. Clean the air filter and air vents. If this does not solve the problem, turn the projector off and unplug it. Contact Epson for help. Power Lamp light light Temp. light Description - Flashing Off Replace the lamp with a new orange one as soon as possible. If you continue to use the lamp, there is a risk it may break. Red Flashing Off red The lamp is burned out, broken, or not installed correctly; or the lamp cover is open. Close the cover or replace or reseat the lamp, if necessary. Also, clean the air filter and air vents. If you are using the projector at an altitude above 4900 ft (1500 m), turn on High Altitude mode as the Operation setting in the Extended menu. If these suggestions don't work, contact Epson. Red Off Red The projector has overheated and turned itself off. Let it cool for about five minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. Also clean the air filter and air exhaust vents. If it continues to overheat, you may need to replace the air filter. Red Off Flashing orange The projector is too hot. Make sure the temperature surrounding the projector does not exceed 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. Clean the air filter and air vents, if necessary. See page 12 for instructions. Flashing Off Off The projector is shutting down. orange Wait for the light to stop flashing and remain orange before unplugging it. Orange Off Off The projector is in standby or sleep mode. You can unplug it or press the P Power button to turn it on. Flashing Off Off The projector is warming up. green Wait for the image to appear. Green Off Off The projector is operating normally. 10 - PowerLite S5 Series / 77c Projector 3/08