Epson PowerLite700c User Manual - Page 64
Connecting to External Speakers or a PA System
View all Epson PowerLite700c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
note The internal speaker is disabled when you use an external audio system. Connecting to External Speakers or a PA System The projector's internal speaker is loud enough for most smallor medium-size rooms. For large rooms or maximum volume, you can connect the projector to external speakers or a public address (PA) system. You will need an RCA-to-3.5 mm stereo audio cable, which may be included with your sound system, or may be purchased from an electronics store. Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable's 3.5 mm stereo miniplug to the projector's Audio Out jack. Audio Out jack stereo audio cable 2. Connect the RCA plugs to the speaker or PA system. Insert the cable's red plug into the Audio R jack, and the white plug into the Audio L jack. Getting Started 21