Epson PowerLite700c User Manual - Page 98
for instructions on transferring an image to use
View all Epson PowerLite700c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
4. Press the bottom edge of the Enter button (or tilt it down) repeatedly to select one of the following options: s P-in-P Changes from a composite (standard) video source to an S-video source for the picture-in-picture display. s No-Signal Msg Selects the screen color and message to display when the projector is not receiving a signal. The logo setting displays an image that you have transferred to the projector. See page 56 for instructions on transferring an image to use as the no-signal message. s Prompt Turns off the identifying text that appears briefly when you switch from computer input to a video source. s A/V Mute Selects the screen color or image to display when you press the AV/Mute button. The logo setting displays an image that you have transferred to the projector. See page 56 for instructions on transferring an image to use for the A/V Mute display. s Power Mgmt Sys Turns on the power management system, which takes effect when your laptop goes into sleep mode. 5. Press the right side of the Enter button to move through the settings available for each option. 6. When you're finished, press Esc. Fine-Tuning Your Projector 55