Epson Pro Cinema LS10500 Quick Setup and Warranty - Page 1

Epson Pro Cinema LS10500 Manual

Get Epson Pro Cinema LS10500 PDF manuals and user guides View all Epson Pro Cinema LS10500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Pro Cinema LS10500 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If this isn't possible, use the lens shift feature or the keystone correction button on the projector to reposition the image (see "Adjust the image"). To view 3D images correctly, RF 3D glasses must be worn within 32 feet (10 m) of the projector. Use the image to determine the viewing distance for 3D projection (the shading represents the 3D viewing area): For more information on where to place your projector, see the online User's Guide. Connect the projector Follow the steps below to connect a video device. For additional connection types, see the online User's Guide. 1 Loosen the two screws at the bottom of the cable cover, then pull the cover forward. Turn on your equipment 1 Turn on your video source. 2 Plug in the projector. 3 Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on. Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control. 4 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Settings and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit. Using the remote control Install two AA batteries as shown. 2 Remove the cable cover from the grooves at the top of the projector. 3 Connect multiple video devices and use the Source buttons on the remote control or the Source button on the projector to switch between them. HDMI cable Turn projector on Choose which source to display Control connected sources with HDMI Link Adjust zoom, focus, and lens shift Access projector menus Change the 3D format Turn projector off Turn projector display off Switch between 2D and 3D Navigate projector menus Display test pattern Component video cable RCA video cable For more information on using the remote control, see the online User's Guide.

  • 1
  • 2
  • 3
  • 4
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a
height so its lens is even with the top or
bottom of the screen and is centered
horizontally. If this isn’t possible, use the
lens shift feature or the keystone
correction button on the projector to
reposition the image (see “Adjust the
image”).
To view 3D images correctly, RF 3D
glasses must be worn within 32 feet
(10 m) of the projector. Use the image to
determine the viewing distance for 3D projection
(the shading represents the 3D viewing area):
For more information on where to place your projector, see the online
User’s
Guide
.
Connect the projector
Follow the steps below to connect a video device. For additional connection
types, see the online
User’s Guide.
1
Loosen the two screws at the bottom of the cable cover, then pull the
cover forward.
2
Remove the cable cover from the grooves at the top of the projector.
3
Connect multiple video devices and use the Source
buttons on the remote
control or the
Source
button on the projector to switch between them.
Component video
cable
RCA video cable
HDMI cable
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Press the
power button on the projector or the
On
button on the
remote control. The shutter opens and the power
light flashes blue,
then stays on.
Note:
To shut down the projector, press the
power button on the
projector or the
Standby
button on the remote control.
4
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Settings
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
. Press the
Menu
button to exit.
Using the remote control
Install two AA batteries as shown.
Choose which source
to display
Turn projector on
Access projector menus
Change the
3D format
Adjust zoom, focus,
and lens shift
Turn projector
display off
Navigate projector
menus
Display test pattern
Turn projector off
Switch between
2D and 3D
Control connected
sources with
HDMI Link
For more information on using the remote control, see the online
User’s Guide
.
Pro Cinema LS10500