Epson R260 Product Information Guide - Page 3

Epson Stylus Photo R260 Electrical Rated Voltage 100-120 V Model 220-240 V Model Input voltage range* AC 90 to 132 V AC 198 to 264 V Rated frequency range 50 to 60 Hz Input frequency range 49.5 to 60.5 Hz Rated current 0.6 A (Max. 0.9 A) 0.3 A (Max. 0.5 A) Power consumption ISO/IEC10561 Approx. 12 W Letter Pattern Sleep mode Approx. 1.1 W Approx. 1.2 W Power off mode Approx. 0.2 W Approx. 0.4 W * Check the label on the back of the printer for its voltage. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage -4 to 104 °F (-20 to 40 °C) 1 month at 104 °F (40 °C) Humidity (without condensation) Operation 20 to 80% RH Storage 5 to 85% RH Safety Approvals Safety standards EMC UL 60950-1 CAN/CSA-22.2 No.60950-1 FCC part 15 Subpart B class B CAN/CSA-CEI/IEC CISPR 22 Class B Paper Paper Type Specifications Single sheets Plain bond paper or special paper distributed by Epson Thickness: 0.003 to 0.004 inch (0.08 to 0.11 mm) for plain bond paper Weight: 17 lb to 24 lb (64 g/m² to 90 g/m²) for plain bond paper Envelopes Plain bond paper Weight: 20 lb to 24 lb (75 g/m² to 90 g/m²) Printable area Normal Borderless* Envelopes A The minimum top margin is 0.12 inches (3.0 mm). B-L The minimum left margin is 0.12 inches (3.0 mm). B-R The minimum right margin is 0.12 inches (3.0 mm). C The minimum bottom margin is 0.12 inches (3.0 mm). D-L The minimum left margin is 0.20 inches (5.0 mm). D-R The minimum right margin is 0.20 inches (5.0 mm). E The minimum bottom margin is 0.78 inches (20.0 mm). * When you print with the borderless feature, print quality may decline in the expanded area. Before printing large jobs using the borderless setting, print a single sheet to confirm printout quality. Note: Always load paper into the sheet feeder with the short edge first. Load envelopes flap edge left with the flap side down. 9/06 Epson Stylus Photo R260 - 3