Epson R800 Start Here Card - Page 3

4 Install Ink Cartridges CAUTION: Don't load paper before you install the ink cartridges so the paper doesn't interfere with ink charging. 1 Open the output tray, pull out its extensions, and open the printer cover. 2 Release and open the cartridge cover, then remove the protective sheet inside. 3 Shake the ink cartridge packages 4 or 5 times before opening them. (Don't shake them after they're unpacked.) 4 Remove the ink cartridges from their packages. CAUTION: Don't remove any labels or seals from the cartridge. 5 Slide each cartridge individually into its slot with the green part facing the front. Make sure the colors on the cartridges match the labels inside the cartridge cover. Then push each one down until it clicks into place. Don't touch the green part 6 Close the cartridge cover and press it down until it clicks into place. 7 Close the printer cover, then press the ink button. The green power and red ink lights flash as your printer charges ink for about 21/2 minutes. CAUTION: Don't turn off the printer or interrupt charging, or you'll waste ink. If the power and ink lights don't turn off after 5 minutes, and the printer isn't making any noise, you can turn it off.