Epson RX620 Product Information Guide - Page 16

Epson Stylus Photo RX620 3. Open the ink cartridge holder's cover. Caution: Never attempt to open the cartridge holder's cover while the print head is moving. Wait until the cartridges have moved to the replacement position. 7. Close the ink cartridge holder's cover, then close the scanner section. 4. Remove the cartridge you need to replace. Press in the tab at the back of the cartridge to release it, then lift the cartridge straight out. Dispose of it carefully. Caution: If you find it difficult to close the cover, make sure all the cartridges are firmly seated. Press down on each newly installed cartridge until you hear it click into place. Do not attempt to force the cover closed. The RX620 begins charging the ink delivery system and the message Ink Charging appears on the LCD screen. When you see the message Ink cartridge replacement completed, press OK. Caution: Never turn off the RX620 during ink charging, unless the RX620 hasn't moved or made noise for more than 5 minutes. This may cause incomplete charging of ink. Note: The illustration above shows the black cartridge being removed. Only remove the cartridge(s) you need to replace. 5. Unwrap the new cartridge. 6. Insert the new cartridge into the holder. Press down firmly until it clicks into place. Aligning the Print Head If your printouts look grainy or vertical lines appear jagged, you may need to align the print head. 1. Make sure the RX620 is turned on and not printing. 2. Load several sheets of plain letter-size paper. 3. Press the Setup button to enter setup mode, then press the u and d buttons to select Head Alignment. 4. Press the OK button, then press OK again to print an alignment pattern. If you need to replace other ink cartridges, repeat steps 4 through 6 before continuing with the next step. 16 - Epson Stylus Photo RX620 11/04