Epson S40600 User Manual - Page 2

2 | Unpacking and assembling the printer Unpacking and assembling the printer Note: Unless otherwise indicated, the illustrations in this manual show the SureColor® S40600, but the instructions apply to all models. Before you begin, make sure you have enough space to set up and use the printer. When choosing a place for the printer, select a location that provides easy access to the printer and is within the printer's operating conditions (59 to 95 °F [15 to 35 °C]; 20 to 80% humidity without condensation). The following illustration shows the minimum space required to use the printer: 3.9 in. (10 cm) 19.7 in. (50 cm) 145.5 in. (362 cm) 39.4 in. (100 cm) 69.7 in. (177 cm) 39.4 in. (100 cm) 107.9 in. (274 cm) 19.7 in. (50 cm) Caution: Avoid locations subject to direct sunlight, excessive heat, moisture, smoke, dust, sand, or vibrations from other equipment. Do not tilt the printer more than 10° while moving it. WARNING: Eight people are required to unpack and install the printer. Be sure the printer is placed on a flat, stable location that is well ventilated and can support the following weight and power requirements for each printer: • SC-S40600 - 615 lb (279 kg); access to one or more outlets for 2 power cables with a total amperage of 20 A at 100 V or 10 A at 240 V • SC-S60600 - 641 lb (291 kg); access to one or more outlets for 3 power cables with a total amperage of 21 A at 100 V or 10.5 A at 240 V • SC-S80600 - 626 lb (284 kg); access to one or more outlets for 2 power cables with a total amperage of 20 A at 100 V or 10 A at 240 V